Jet PreCooler Features

• High-output energy-efficient fans specifically designed for Jet PreCoolers

1. 44,000 CFM @ 1” static pressure and 32,000 CFM @ 2” static pressure
2. More CFM = faster cooling; it is that simple
3. Pre-cool and re-cool in record times. Twice as fast as any standard bunker cooler
4. 30” diameter fans in 36” square frames
5. Better than the old Jet-Ready PreCoolers

• All welded heavy-duty frame

1. Strong enough to stand up to the expected forklift abuse
2. Frames will not rack or bend – designed to be pushed up against a concrete curb
3. Four-way forklift entry
4. All welded structural and formed steel. No bolts to loosen or rust
5. Sandblasted and finished with epoxy two-part marine grade paint
6. Better than the old Jet-Ready PreCoolers

• Electrical

1. Two 10 Hp 1770 RPM Premium Efficiency VFD Capable TEFC motors
2. 460V 3 PH 60Hz – 240 volt option available
3. 24.4 FLA total at 460/60/3
4. NEMA 4x wash-down
5. OSHA 60 amp NEMA 4x power disconnect

• Control:

1. 304 stainless steel NEMA 4x enclosure
2. magnetic starter
3. Thermal protection for each motor
4. Start/Stop: two button red/green or Intermatic run-down timer
5. Simplified industrial-grade control

• Options:

1. 220 Volt 3 Phase 60 Hz
2. Magnahelic pressure gauge
3. Variable Frequency Drive – soft start and with full range speed control
4. Optional Run-Up Clock – always know the status of your cooling process

1. Displays Minutes and Seconds (MM:SS) with a maximum 59:59 elapsed time
2. Timer begins run-up when the fans are started
3. Automatically resets to 00:00 when the fans are stopped
4. 4” digits visible up to 200 feet away

• Customize with your full-color logo on the tarp

1. You provide your high-resolution full-color logo art and we print and place it near the end of the tarp. It will prominently show on the end of the tunnel when you are cooling product.
2. A fantastic opportunity to promote your brand to site visitors.
3. Dimensions can be 18 inches tall by any width up to 7 feet

Tarp Roller Included As Standard Option:

1. A tarp roller is the best way to set-up and break down forced air tunnels
2. Tarp ready to go with installed FRP rod stiffeners – no inferior PVC pipe stiffeners here
3. Superior foam bumpers
4. Pallet air seals are included. Block by-pass air from traveling through the pallets and not your product.

Today’s Jet PreCooler has advantages over the old-style Jet Ready PreCooler:
• All welded, engineered frame. It will not rack or bend
• More CFM with higher static pressures
• State-of-the-art fans for better performance
• Simpler wiring and controls
• Plug and play. Push the green button. You are good to go.

Call or email The Jet PreCooler Company now. We are here to serve your needs.

Executive Office

1149 Seaview Ave
Pacific Grove, CA 93950


7127 E Gila Ridge Road
Yuma, AZ 85365

Phone Numbers